View STK760-213AC-E_7262911.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

o2412hkpc 018-12-0024 no.a2147-1/11 STK760-213AC-E overview this ic is average current control type active converter hybrid ic for power factor improvement of single-phase ac power supply, that containing power devices of step-up active converter, control ic over-current and over-voltage protection circuits. applications ? single-phase rectification active filter for power rectifi cation for air conditioners and general-purpose inverters. features ? power switching device for active converter is adopting igbt. ? soft start functions and the over current, the over voltage, and the low-voltage are including as protection circuit ? capable of controlling on/off by logic level input signal. ? output voltage changeability functions by control signal. ordering number : ena2147 thick-film hybrid ic single-phase rectification active converter hybrid ic specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer ' s products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer ' s products or equipment. any and all sanyo semiconductor co.,ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. the products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appli ances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliab ility and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. if you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. if there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use.
STK760-213AC-E no.a2147-2/11 specifications absolute maximum ratings at ta = 25 c parameter symbol conditions ratings unit collector-emitter voltage vce 600 v repetitive peak collector current icp *1 240 a collector current ic 88 a igbt (tr1+tr2) power dissipation pc1 150 w diode reverse voltage vrm 600 v repetitive peak forward current if1p *1 110 a diode forward current if1 36 a frd1 (d1) power dissipation pd1 75 w repetitive peak forward current if2p *1 15 a diode forward current if2 7 a frd2 (d2) power dissipation pd2 13 w supply voltage (v cc -gnd) v cc 20 v pin 4 vis -10 to 0.3 pin 5 vcomp pin 8 vfb pin 9 vovp -0.3 to 6.5 pin 2 vonf signal pin input voltage pin 6 vctl -0.3 to v cc v maximum input ac voltage vac single-phase full-rectified 264 v maximum output voltage v o 450 v maximum output power wo 6kw input ac current (normal condition) i in under the application condition (vac=200v) 30 arms junction temperature tj 150 c operating case temperature tc hic case temperature *2 -20 to +100 c storage temperature tstg -40 to +125 c tightening torque a screw part *3 1.17 n ? m withstand voltage vins 50hz sine wave ac 1minute *4 2000 vrms [note] *1: duty ratio d = 0.1, tp = 1ms *2: measure point is betwee n 5mm to center of back. *3: torque should be set within 0.79 to 1.17n ? m. flatness of the heat-sink should be lower than 0.2mm. *4: the test condition: ac2500v, 1 second.
STK760-213AC-E no.a2147-3/11 electrical characteristics at tc = 25 c, v cc = 15.0v: unless otherwise noted ratings parameter symbol conditions test circuit min typ max unit power output part collector-emitter leak current (igbt) i ces v ce = 600v fig.1 200 a collector-emitter saturation voltage (igbt) v ce (sat) i c = 40a fig.2 1.3 1.9 v diode reverse current (frd1) i r v r = 600v fig.1 200 a diode forward voltage (frd1) v f 1 i f = 40a fig.3 2.2 2.8 v diode forward voltage (frd2) v f 2 i f = 5a fig.3 2.5 3.5 v j-c1 igbt (tr1+tr2) 0.83 c/w j-c2 frd1 (d1) 1.65 c/w junction to case thermal resistance j-c3 frd2 (d2) 9.0 c/w control ic part i cc (on) v cc = 15v, vonf = 5v 14 20 control ic input current i cc (off) v cc = 15v, vonf = 0v 2.5 5 ma oscillation frequency f osc 19.5 22.0 24.5 khz open loop protection threshold voltage volp fig.4 0.8 0.95 1.1 v error-amp reference volt age vref 4.88 5.0 5.12 v peak current protection threshold voltage vis(pk) fig.5 -0.58 -0.5 -0.42 v over voltage protection threshold voltage vovp(on) v cc = 15v, vonf = 5v fig.6 5.095 5.3 5.51 v vthon 3.0 v on/off threshold voltage vthoff v cc = 15v fig.7 0.5 v start-up v cc voltage v cc (on) 12.4 13.25 14.1 v shut-down v cc voltage v cc (off) vonf = 5v fig.8 9.4 10.0 10.7 v substrate temperature monitor resistance rth resistance between vth-gnd fig.3 90 100 110 k application circuit : vac = 200v, v o = 380v (vctl = 1.507v) output voltage v o wo = 2kw 366 380 394 v wo = 400w 0.98 0.99 power factor cos wo = 2kw fig.9 0.99 0.995 1.0
STK760-213AC-E no.a2147-4/11 package dimensions unit:mm (typ) igbt (tr1+tr2), frd1 (d1) & frd2 (d2) vs. temperature derating (ta = 25 c) 0 60 40 20 100 80 120 140 160 180 06080100 40 20 120 pd -- tc case temperature, tc -- c power dissipation, pd -- w igbt frd1 frd2 122 3.5 10.5 70.0 78.0(hic part) 6.0 2.0 2.54 0.75 21 2.54=53.34 58.0 31.1 4.6 (16.0) 2.5 0.5 0.5 r2.3
STK760-213AC-E no.a2147-5/11 block diagram c (d1) frd1 igbt v cc (tr1) (tr2) igbt driver s v m 0 r q drive circuit enable mode rc averaging biss & internal reference vm vref enable discharge vthbop bop comparator vcomp start voltage error amp comparator discharge vcomp input peak current protection ovp/enable detector v o control buffer output voltage detector max duty cycle integrated ramp oscillator uvlo block frd2 (d2) e vis v cc v comp vth vh1 k vovp vfb vcao vctl vonf gnd explanation of terminal terminal no. symbol explanation 1 v cc control ic power supply input 2 vonf on/off control terminal 3 gnd signal gnd 4 vis current detection terminal 5 vcomp phase compensation terminal (voltage error amplifier out) 6 vctl output voltage control signal input 7 vcao output voltage c ontrol amplifier output 8 vfb output voltage feed back terminal 9 vovp over voltage protection terminal 10 vth terminal of thermistor th1 11, 12 - an empty terminal 13, 14 e igbt (tr1+tr2) emitter 15, 16 - an empty terminal 17, 18 c igbt (tr1+tr2) collector 19, 20 - an empty terminal 21, 22 k frd1 (d1) cathode
STK760-213AC-E no.a2147-6/11 test circuit -1 (1) i ces , i r igbt frd1 a 17, 18 21, 22 b 13, 14 17, 18 ? fig.1 ? (2) v ce (sat) (test by pulse) ? fig.2 ? (3) v f 1, v f 2 (test by pulse), rth frd1 frd2 a 17, 18 13, 14 b 21, 22 17, 18 ? fig.3 ? a v ce , vr a 3 b 13,14 v v t v cc =15v v ce (sat) vonf vovp vfb e i c 0v 4.8v 2.0v 6.0v v ce (sat) on off 100 f 1 3 7 8 13,14 17,18 9 6 2 v a b 10 3 i f r
STK760-213AC-E no.a2147-7/11 test circuit -2 (4) i cc (on)/i cc (off), volp, f osc i cc , f osc volp vfb = 1.1v vonf = 5.0v ? fig.4 ? (5) vref, vis(pk) vref vis(pk) vis = -0.6v vfb = 4.8v ? fig.5 ? (6) vovp(on) ? fig.6 ? i cc a v cc =15v vonf vovp vfb e 5.0v i cc (off) i cc (on) 100 f r l =1k f osc 1 3 7 8 13,14 17,18 9 6 2 v cc =15v vonf vis vovp vfb e 5.0v 2.0v 100 f r l =1k v c 1 3 7 8 13,14 17,18 9 6 2 v cc =15v vonf vovp vfb e 2.0v 4.8v 100 f r l =1k v c 1 3 7 8 13,14 17,18 9 6 2
STK760-213AC-E no.a2147-8/11 test circuit -3 (7) vthon, vthoff ? fig.7 ? (8) v cc (on), v cc (off) v cc (on) v cc (off) vc-on vc-off ? fig.8 ? (9) power factor (cos ) 2.2 f /630v 2.2 f /630v 470 f /450v 2 0.5mh/20a 100 f/25v v o condition : vac=200v v o =380v load1=400w load2=2kw c6 c5 v cc =15v vctl on/of r1 c2 c3 c1 l1 db1 680k 680k 470k 470k r4 r5 9 8 7 6 5 4 3 2 1 r2 r3 c4 0v 7m /7w 100 load 0.01 f 0.47 f/25v 4.7 f/25v v cc vonf gnd vis vcomp vcao vfb ovp 10 vth vctl rs ci vac w w on : (2)pin=5v to v cc off : (2)pin=0v(gnd) gnd 22 18 14 13 21 17 ? fig.9 ? 8 13,14 17,18 v cc vonf vovp vfb e 2.0v 4.8v 5.0v 100 f r l =1k v c 1 3 7 9 6 2 v cc =15v vonf vovp vfb e 5.0v 4.8v 100 f r l =1k v c 1 3 7 8 13,14 17,18 9 6 2
STK760-213AC-E no.a2147-9/11 application circuit 3.3 f /630v 2.2 f /630v 470 f /450v 4 0.5mh/30a 100 f/25v on : (2)pin=5v to v cc off : (2)pin=0v(gnd) v o co cs v cc =15v vctl on/of r1 c2 c3 c1 l1 db1 680k 680k 470k 470k r4 r5 22 18 14 10 9 7 6 5 4 3 2 1 r2 r3 c4 gnd 0v 7m /7w 100 load noise filter 0.01 f 0.47 f/25v 10 f/25v v cc vonf gnd vis vcomp vcao vfb ovp vctl rs sw ri ci v ac 13 21 17 recommended condition parameter symbol conditions ratings unit ac voltage vac 50/60h z 170 to 264 vrms output voltage v o vac 2+(10 to 15) 450 v over-voltage detection voltage vov v out +(10 to 20) v control ic supply voltage v cc v cc -gnd 14.5 to 17.0 v inductor l1 0.5 mh input film capacitor ci 3.3 ci f output film capacitor cs 2.2 cs f output electrolytic capacitor co 1880 co f output voltage control output voltage control signal vctl sets referring to the vctl-v o characteristic of the figure below. 240 300 280 260 340 320 360 380 400 420 1 1.6 1.8 2.0 2.2 2.4 2.6 1.4 1.2 2.8 vctl -- v o output voltage control signal input, vctl -- v output voltage, v o -- v
STK760-213AC-E no.a2147-10/11 timing chart even if power supply and signal at any timing are input, this ic is not destroyed. however, soft start circuit doesn't operate when v in (dc) is input at the timing of figure 11 and 12. therefore, overcurrent protection circuit will operate, and audio frequency noise from coil may generate. please turn on on/off or v cc after v in (dc) to avoid this. 0v 0v 0v off v in (dc) input timing 1 on on v cc on/off voltage control signal 0v 0v 0v off input timing 2 ? fig.11 ? ? fig.12 ? the built-in thermistor resist ance temperature characteristic 0 3 2 7 10 5 3 2 7 100 5 3 2 7 1000 5 3 2 7 5 10000 -- 50 0 -- 25 75 100 125 50 25 150 rth -- tc case temperature, tc -- c thermistor resistance, rth -- k m i n m a x t y p
STK760-213AC-E ps no.a2147-11/11 sanyo semiconductor co.,ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specif ications of any and all sanyo semiconductor co.,ltd. products described or contained herein. regarding monolithic semiconductors, if you should intend to use this ic continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. please contact us for a confirmation. sanyo semiconductor co.,ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. it is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo semiconductor co.,ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of sanyo semiconductor co.,ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equ ipment, refer to the "delivery specification" for the sanyo semiconductor co.,ltd. product that you intend to use. upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of sanyo semiconductor co.,ltd. or any third party. sanyo semiconductor co.,ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. this catalog provides information as of october, 2012. specifications and information herein are subject to change without notice.

▲Up To Search▲

Price & Availability of STK760-213AC-E

	To Download STK760-213AC-E Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .